QMICLI(1) QMICLI(1) (NAME) qmicli - QMI (DESCRIPTION) (Usage): qmicli [...] - QMI (Help Options): -h, --help --help-all --help-dms (DMS) --help-nas (NAS) --help-wds (WDS) --help-pbm (PBM) --help-pdc (PDC) --help-uim (UIM) --help-sar (SAR) --help-wms (WMS) --help-wda (WDA) --help-voice (Voice) --help-loc (LOC) --help-qos (QoS) --help-gas (GAS) --help-gms (GMS) --help-dsd (DSD) --help-dpm (DPM) --help-fox (Foxconn) --help-atr AT (ATR) --help-imsp IP (IMSP) --help-imsa IP (IMSA) --help-ims IP (IMS) --help-link-management --help-qmiwwan qmi_wwan DMS ( ): --dms-get-ids --dms-get-capabilities --dms-get-manufacturer --dms-get-model --dms-get-revision --dms-get-msisdn MSISDN --dms-get-power-state --dms-uim-set-pin-protection=[(PIN|PIN2),(disable|enable),(current PIN)] (PIN) UIM --dms-uim-verify-pin=[(PIN|PIN2),(current PIN)] (PIN) --dms-uim-unblock-pin=[(PIN|PIN2),(PUK),(new PIN)] (PIN) --dms-uim-change-pin=[(PIN|PIN2),(old PIN),(new PIN)] (PIN) --dms-uim-get-pin-status (PIN) --dms-uim-get-iccid ICCID --dms-uim-get-imsi IMSI --dms-uim-get-state UIM --dms-uim-get-ck-status=[(pn|pu|pp|pc|pf)] CK --dms-uim-set-ck-protection=[(pn|pu|pp|pc|pf),(disable),(key)] CK --dms-uim-unblock-ck=[(pn|pu|pp|pc|pf),(key)] CK --dms-get-hardware-revision --dms-get-operating-mode --dms-set-operating-mode=[(Operating mode)] --dms-get-time --dms-get-prl-version PRL --dms-get-activation-state --dms-activate-automatic=[Activation Code] --dms-activate-manual=[SPC,SID,MDN,MIN] --dms-get-user-lock-state --dms-set-user-lock-state=[(disable|enable),(current lock code)] --dms-set-user-lock-code=[(old lock code),(new lock code)] --dms-read-user-data --dms-write-user-data=[(User data)] --dms-read-eri-file ERI --dms-restore-factory-defaults=[(Service Programming Code)] --dms-validate-service-programming-code=[(Service Programming Code)] (SPC) --dms-set-firmware-id --dms-get-band-capabilities --dms-get-factory-sku SKU --dms-list-stored-images --dms-select-stored-image=[modem#,pri#] where # is the index --dms-delete-stored-image=[modem#|pri#] where # is the index --dms-get-firmware-preference --dms-set-firmware-preference=["key=value,..."] ( : firmware-version config-version carrier : modem-storage-index override-download=yes) --dms-get-boot-image-download-mode --dms-set-boot-image-download-mode=[normal|boot-and-recovery] --dms-get-software-version --dms-set-fcc-authentication FCC --dms-get-supported-messages --dms-hp-change-device-mode=[fastboot] ( HP) --dms-swi-get-current-firmware ( Sierra Wireless) --dms-swi-get-usb-composition USB ( Sierra Wireless) --dms-swi-set-usb-composition=[#] USB ( Sierra Wireless) --dms-foxconn-change-device-mode=[fastboot-ota|fastboot-online] ( Foxconn) --dms-foxconn-get-firmware-version=[firmware-mcfg-apps|firmware-mcfg|apps] ( Foxconn) --dms-foxconn-set-fcc-authentication=[magic] FCC ( Foxconn) --dms-foxconn-set-fcc-authentication-v2=[magic-string,magic-number] FCC ( Foxconn ) --dms-get-mac-address=[wlan|bt] MAC --dms-reset --dms-noop DMS. `-lient-no-release-cid' `-lient-cid' NAS ( ): --nas-get-signal-strength --nas-get-signal-info --nas-get-tx-rx-info=[(Radio Interface)] (TX/RX) --nas-get-home-network (Home Network) --nas-get-serving-system --nas-get-system-info --nas-get-technology-preference --nas-get-preferred-networks --nas-set-preferred-networks=[[MCCMNC,access_tech],...] --nas-get-system-selection-preference --nas-set-system-selection-preference=[cdma-1x|cdma-1xevdo|gsm|umts|lte|td-scdma][,[automatic|manual=MCCMNC]] --nas-network-scan=[gsm|umts|lte|td-scdma|5gnr] ( ) --nas-incremental-network-scan=[gsm|umts|lte|td-scdma|5gnr] ( ) --nas-get-cell-location-info --nas-force-network-search --nas-get-operator-name --nas-get-plmn-name=[mccmnc] PLMN --nas-get-lte-cphy-ca-info Cphy LTE --nas-get-rf-band-info RF --nas-get-network-time --nas-get-drx DRX --nas-get-endc-config EN-DC --nas-get-supported-messages --nas-swi-get-status ( Sierra Wireless) --nas-reset --nas-noop NAS. `-lient-no-release-cid' `-lient-cid' WDS ( ): --wds-start-network=["key=value,..."] ( : apn 3gpp-profile 3gpp2-profile auth (PAP|CHAP|BOTH) username password autoconnect=yes ip-type (4|6)) --wds-follow-network . `-672 --wds-stop-network=[Packet data handle] OR [disable-autoconnect] --wds-get-current-settings --wds-get-packet-service-status (Packet Service) --wds-get-packet-statistics --wds-get-data-bearer-technology --wds-get-current-data-bearer-technology --wds-go-dormant / (dormant) --wds-go-active --wds-get-dormancy-status --wds-create-profile=["(3gpp|3gpp2)[,key=value,...]"] ( : name apn pdp-type (IP|PPP|IPV6|IPV4V6) auth (NONE|PAP|CHAP|BOTH) username password context-num no-roaming=yes disabled=yes) --wds-swi-create-profile-indexed=["(3gpp|3gpp2),#[,key=value,...]"] [ Sierra Wireless] ( : name apn pdp-type (IP|PPP|IPV6|IPV4V6) auth (NONE|PAP|CHAP|BOTH) username password context-num no-roaming=yes disabled=yes) --wds-modify-profile=["(3gpp|3gpp2),#,key=value,..."] ( : name apn pdp-type (IP|PPP|IPV6|IPV4V6) auth (NONE|PAP|CHAP|BOTH) username password context-num no-roaming=yes disabled=yes) --wds-delete-profile=[(3gpp|3gpp2),#] --wds-get-profile-list=[3gpp|3gpp2] --wds-get-default-profile-number=[3gpp|3gpp2] --wds-set-default-profile-number=[(3gpp|3gpp2),#] --wds-get-default-settings=[3gpp|3gpp2] --wds-get-autoconnect-settings --wds-set-autoconnect-settings=[(enabled|disabled|paused)[,(roaming-allowed|home-only)]] ( ) --wds-get-supported-messages --wds-reset --wds-bind-data-port=[a2-mux-rmnet0-7|#] `-lient-no-release-cid' --wds-bind-mux-data-port=["key=value,..."] qmux ( : mux-id ep-type (undefined|hsusb|pcie|embedded|bam-dmux) ep-iface-number) `-lient-no-release-cid' --wds-set-ip-family=[4|6] IP --wds-get-channel-rates --wds-get-lte-attach-parameters (attach) LTE --wds-get-max-lte-attach-pdn-num PDN LTE --wds-get-lte-attach-pdn-list PDN LTE --wds-set-lte-attach-pdn-list=[#,#,...] PDN LTE --wds-noop WDS. `-lient-no-release-cid' `-lient-cid' PBM ( ): --pbm-get-all-capabilities --pbm-get-emergency-list --pbm-noop PBM. `-lient-no-release-cid' `-lient-cid' PDC ( ): --pdc-list-configs=[(platform|software)] --pdc-delete-config=[(platform|software),ConfigId] --pdc-activate-config=[(platform|software),ConfigId] --pdc-deactivate-config=[(platform|software),ConfigId] --pdc-load-config=[Path to config] --pdc-monitor-refresh / --pdc-noop PDC. `-lient-no-release-cid' `-lient-cid' UIM ( ): --uim-set-pin-protection=[(PIN1|PIN2|UPIN),(disable|enable),(current PIN)[,"key=value,..."]] ( : session-type ((primary|secondary|tertiary|quarternary|quinary)-gw-provisioning|card-slot-[1-5])) --uim-verify-pin=[(PIN1|PIN2|UPIN),(current PIN)[,"key=value,..."]] ( : session-type ((primary|secondary|tertiary|quarternary|quinary)-gw-provisioning|card-slot-[1-5])) --uim-unblock-pin=[(PIN1|PIN2|UPIN),(PUK),(new PIN)[,"key=value,..."]] ( : session-type ((primary|secondary|tertiary|quarternary|quinary)-gw-provisioning|card-slot-[1-5])) --uim-change-pin=[(PIN1|PIN2|UPIN),(old PIN),(new PIN)[,"key=value,..."]] ( : session-type ((primary|secondary|tertiary|quarternary|quinary)-gw-provisioning|card-slot-[1-5])) --uim-read-transparent=[0xNNNN,0xNNNN,...] --uim-get-file-attributes=[0xNNNN,0xNNNN,...] --uim-read-record=["key=value,..."] ( : record-number record-length file ([0xNNNN-0xNNNN,...])) --uim-get-card-status --uim-get-supported-messages --uim-sim-power-on=[(slot number)] --uim-sim-power-off=[(slot number)] --uim-change-provisioning-session=["key=value,..."] ( : session-type ((primary|secondary|tertiary|quarternary|quinary)-gw-provisioning) activate (yes|no) slot aid) --uim-get-slot-status --uim-switch-slot=[(slot number)] --uim-monitor-slot-status --uim-reset --uim-monitor-refresh-file=[0xNNNN,0xNNNN,...] / --uim-monitor-refresh-all / --uim-get-configuration --uim-depersonalization=[(feature),(operation),(control key)[,(slot number)]] --uim-remote-unlock=[XX:XX:...] SimLock --uim-open-logical-channel=[(slot number),(aid)] --uim-close-logical-channel=[(slot number),(channel ID)] --uim-send-apdu=[(slot number),(channel ID),(apdu)] APDU --uim-noop UIM. `-lient-no-release-cid' `-lient-cid' SAR ( ): --sar-rf-get-state RF --sar-rf-set-state=[(state number)] RF. --sar-noop SAR. `-lient-no-release-cid' `-lient-cid' WMS ( ): --wms-get-supported-messages --wms-get-routes (SMS) --wms-set-routes=["key=value,..."] (: type class storage receipt-action) --wms-set-cbs-channels=[start-end,start-end] CBS ( 4371-4372,4370,4373-4380) --wms-get-cbs-channels CBS --wms-reset --wms-noop WMS. `-lient-no-release-cid' `-lient-cid' WDA ( ): --wda-set-data-format=["key=value,..."] ( : link-layer-protocol (802-3|raw-ip) ul-protocol (disabled|tlp|qc-ncm|mbim|rndis|qmap|qmapv5) dl-protocol (disabled|tlp|qc-ncm|mbim|rndis|qmap|qmapv5) dl-datagram-max-size dl-max-datagrams ep-type (undefined|hsusb|pcie|embedded) ep-iface-number ul-datagram-max-size ul-max-datagrams) --wda-get-data-format=["key=value,..."] ( : ep-type (undefined|hsusb|pcie|embedded) ep-iface-number) --wda-get-supported-messages --wda-set-loopback-configuration=["key=value,..."] Loopback ( : state (enabled|disabled) replication-factor) --wda-noop WDA. `-lient-no-release-cid' `-lient-cid' VOICE ( ): --voice-get-config --voice-get-supported-messages --voice-noop VOICE. `-lient-no-release-cid' `-lient-cid' LOC (): --loc-session-id=[ID] LOC --loc-start --loc-stop --loc-get-position-report --loc-get-gnss-sv-info GNSS --loc-timeout=[SECS] `-sition-report' `-' (: ) --loc-follow-position-report --loc-follow-gnss-sv-info GNSS --loc-follow-nmea NMEA --loc-delete-assistance-data --loc-get-nmea-types NMEA --loc-set-nmea-types=[type1|type2|type3...] NMEA --loc-get-operation-mode --loc-set-operation-mode=[default|msb|msa|standalone|cellid|wwan] --loc-get-engine-lock --loc-set-engine-lock=[none|mi|mt|all] --loc-inject-position-latitude=-90.0 to 90.0. Positive values indicate northern latitude. GNSS ( ) --loc-inject-position-longitude=-180.0 to 180.0. Positive values indicate eastern longitude. GNSS ( ) --loc-inject-time UTC GNSS --loc-get-predicted-orbits-data-source --loc-get-predicted-orbits-data-validity --loc-noop LOC. `-lient-no-release-cid' `-lient-cid' QoS ( ): --qos-get-flow-status=[QoS ID] QoS --qos-get-network-status --qos-swi-read-data-stats=[APN ID] ( Sierra Wireless) --qos-reset --qos-noop QoS. `-lient-no-release-cid' `-lient-cid' GAS ( ): --gas-dms-set-usb-composition=[pid] USB --gas-dms-get-usb-composition USB --gas-dms-get-firmware-list --gas-dms-get-active-firmware --gas-dms-set-active-firmware=[index] --gas-dms-get-ethernet-mac-address MAC PDU --gas-dms-set-firmware-auto-sim=["key=value,..."] ( : mode (disable|enable|enable-one-shot) config-id) --gas-dms-get-firmware-auto-sim --gas-noop GAS. `-lient-no-release-cid' `-lient-cid' GMS ( ): --gms-test-get-value --gms-test-set-value=[mandatory-value][,[optional-value]] --gms-noop GMS. `-lient-no-release-cid' `-lient-cid' DSD ( ): --dsd-get-apn-info=[(type)] APN --dsd-set-apn-type=[(name), (type1|type2|type3...)] APN --dsd-get-system-status --dsd-noop DSD. `-lient-no-release-cid' `-lient-cid' DPM ( ): --dpm-open-port=["key=value,..."] ( : ctrl-ep-type ctrl-ep-iface-number ctrl-port-name hw-data-ep-type hw-data-ep-iface-number hw-data-rx-id hw-data-tx-id sw-data-ep-type sw-data-ep-iface-number sw-data-port-name) --dpm-close-port --dpm-noop DPM. `-lient-no-release-cid' `-lient-cid' FOX ( ): --fox-get-firmware-version=[firmware-mcfg-apps|firmware-mcfg|apps] --fox-set-fcc-authentication=[magic-string,magic-number] FCC --fox-noop FOX. `-lient-no-release-cid' `-lient-cid' ATR ( AT): --atr-send=[AT command] AT --atr-send-only=[AT command] AT --atr-monitor (unsolicited) --atr-noop ATR. `-lient-no-release-cid' `-lient-cid' IMSP ( IP): --imsp-get-enabler-state IMSP --imsp-noop IMSP. `-lient-no-release-cid' `-lient-cid' IMSA ( IP): --imsa-bind=[binding] IMSA ( -lient-no-release-cid ) --imsa-get-ims-registration-status IMS --imsa-get-ims-services-status IMS --imsa-noop IMSA. `-lient-no-release-cid' `-lient-cid' IMS ( IP): --ims-bind=[binding] IMS ( -lient-no-release-cid ) --ims-get-ims-services-enabled-setting IMS --ims-noop IMS. `-lient-no-release-cid' `-lient-cid' (Link management options): --link-list=[IFACE] --link-add=[iface=IFACE,prefix=PREFIX[,mux-id=N[,initial-mux-id=M]][,flags=FLAGS]] --link-delete=[link-iface=IFACE][,[mux-id=N]] --link-delete-all=[IFACE] qmi_wwan (qmi_wwan specific options): -w, --get-wwan-iface WWAN -e, --get-expected-data-format WWAN -E, --set-expected-data-format=[802-3|raw-ip|qmap-pass-through] WWAN (Application Options): -d, --device=[PATH|URI] QRTR ( qrtr://0) --get-service-version-info --device-set-instance-id=[Instance ID] (Instance ID) --device-open-version-info --device-open-sync -p, --device-open-proxy 'qmi-proxy' --device-open-qmi cdc-wdm QMI --device-open-mbim cdc-wdm MBIM --device-open-auto cdc-wdm QMI MBIM () --device-open-net=[net-802-3|net-raw-ip|net-qos-header|net-no-qos-header] QoS --client-cid=[CID] CID --client-no-release-cid CID -v, --verbose --verbose-full --silent -V, --version (COPYRIGHT) Copyright (C) 2012-2023 Aleksander Morgado License GPLv2+: GNU GPL version 2 or later : . . (SEE ALSO) qmicli Texinfo . info qmicli info qmicli . qmicli 1.38.0 January 2026 QMICLI(1)