fbus

اتصال سریال FBUS

dlr3

کابل‌های DLR-3 و سازگار با آن

dku2

کابل‌های DKU-2 و سازگار با آن

dku5

کابل‌های DKU-5 و سازگار با آن

mbus

اتصال سریال MBUS

at

اتصال عمومی مبتنی بر دستورات AT

irdaphonet

اتصال Phonet برای تلفن‌های همراه نوکیا.

irdaat

اتصال دستورات AT برای اکثر تلفن‌های همراه (این حالت در لینوکس پشتیبانی نمی‌شود).

irdaobex

اتصال OBEX (پروتکل IrMC یا انتقال فایل) برای اکثر تلفن‌های همراه.

irdagnapbus

اتصال مبتنی بر GNapplet برای تلفن‌های همراه سیمبین، پروتکل Gnapplet <#gnapplet> را ببینید.

bluephonet

اتصال Phonet برای تلفن‌های همراه نوکیا.

bluefbus

اتصال FBUS برای تلفن‌های همراه نوکیا.

blueat

اتصال دستورات AT برای اکثر تلفن‌های همراه.

blueobex

اتصال OBEX (پروتکل IrMC یا انتقال فایل) برای اکثر تلفن‌های همراه.

bluerfgnapbus

اتصال مبتنی بر GNapplet برای تلفن‌های همراه سیمبین، پروتکل Gnapplet <#gnapplet> را ببینید.

blues60

اتصال به اپلت Series60 در تلفن‌های همراه S60، پروتکل Series60 Remote <#s60> را ببینید.

در نسخه 1.29.90 اضافه شد.

proxyphonet

اتصال Phonet برای تلفن‌های همراه نوکیا.

proxyfbus

اتصال FBUS برای تلفن‌های همراه نوکیا.

proxyat

اتصال دستورات AT برای اکثر تلفن‌های همراه.

proxyobex

اتصال OBEX (پروتکل IrMC یا انتقال فایل) برای اکثر تلفن‌های همراه.

proxygnapbus

اتصال مبتنی بر GNapplet برای تلفن‌های همراه سیمبین، پروتکل Gnapplet <#gnapplet> را ببینید.

proxys60

اتصال به اپلت Series60 در تلفن‌های همراه S60، پروتکل Series60 Remote <#s60> را ببینید.

obexfs

اجبار به استفاده از سرویس مرور فایل (پشتیبانی از سیستم فایل)

obexirmc

اجبار به استفاده از سرویس IrMC (پشتیبانی از مخاطبین، تقویم و یادداشت‌ها)

obexnone

هیچ سرویسی انتخاب نمی‌شود؛ این مورد تنها استفاده محدودی برای ارسال فایل دارد (دستور gammu sendfile)

mobex

سرویس m-obex برای تلفن‌های همراه سامسونگ

nothing

بدون سطح اشکال‌زدایی

text

تخلیه ارسال داده‌ها در قالب متنی

textall

تمام اطلاعات ممکن در قالب متنی

textalldate

تمام اطلاعات ممکن در قالب متنی، همراه با برچسب زمانی

errors

خطاها در قالب متنی

errorsdate

خطاها در قالب متنی، همراه با برچسب زمانی

binary

تخلیه ارسال داده‌ها در قالب باینری

[gammu]
device = /dev/ttyACM0
connection = dlr3

[gammu]
device = /dev/ttyACM0
connection = at

[gammu]
device = B0:0B:00:00:FA:CE
connection = blueat

[gammu]
device = B0:0B:00:00:FA:CE/42
connection = blueat

[gammu]
device = /dev/ttyS0
connection = at
[gammmu1]
device = /dev/ttyS1
connection = at
[gammmu2]
device = /dev/ttyS2
connection = at

[gammu]
device = ssh root@my.router /usr/local/bin/myscript /dev/ttyUSB0
connection = proxyat

; This is a sample ~/.gammurc file.
; In Unix/Linux  copy it into your home directory and name it .gammurc
;                or into /etc and name it gammurc
; In Win32       copy it into directory with Gammu.exe and name gammurc
; More about parameters later
; Anything behind ; or # is comment.
; -----------------------------------------------------------------------------
[gammu]
device = com8:
connection = irdaphonet
; Do not use model configuration unless you really need it
;model = 6110
;synchronizetime = yes
;logfile = gammulog
;logformat = textall
;use_locking = yes
;gammuloc = locfile
;startinfo = yes
;gammucoding = utf8
;usephonedb = yes
[gammu1]
device = com8:
;model = 6110
connection = fbusblue
;synchronizetime = yes
;logfile = gammulog
;logformat = textall
;use_locking = yes
;gammuloc = locfile
;startinfo = yes
;gammucoding = utf8
; Step 1. Please find required Connection parameter and look into assigned
; with it device type. With some Connection you must set concrete model
; ================================================================ cables =====
; New Nokia protocol for FBUS/DAU9P
;    Connection "fbus", device type serial
; New Nokia protocol for DLR3/DLR3P
;    Connection "fbusdlr3"/"dlr3", device type serial
; New Nokia protocol for DKU2 (and phone with USB converter on phone mainboard
;                              like 6230)
;    Connection "dku2phonet"/"dku2", device type dku2 on Windows
;    Connection "fbususb" on Linux
; New Nokia protocol for DKU5 (and phone without USB converter on phone
;                              mainboard like 5100)
;    Connection "dku5fbus"/"dku5", device type dku5
; New Nokia protocol for PL2303 USB cable (and phone without USB converter
;                                          on phone mainboard like 5100)
;    Connection "fbuspl2303", device type usb
; Old Nokia protocol for MBUS/DAU9P
;    Connection "mbus", device type serial
; Variants:
; You can modify a bit behaviour of connection using additional flags
; specified just after connection name like connection-variant.
; If you're using ARK3116 cable (or any other which does not like dtr
; handling), you might need -nodtr variant of connection, eg. dlr3-nodtr.
; If cable you use is not powered over DTR/RTS, try using -nopower variant of
; connection, eg. fbus-nopower.
; -----------------------------------------------------------------------------
; AT commands for DLR3, DKU5 or other AT compatible cable (8 bits, None
; parity, no flow control, 1 stop bit). Used with Nokia, Alcatel, Siemens, etc.
;    Connection "at19200"/"at115200"/.., device type serial
; AT commands for DKU2 cable
;    Connection "dku2at", device type dku2
; ============================================================== infrared =====
; Nokia protocol for infrared with Nokia 6110/6130/6150
;    Connection "fbusirda"/"infrared", device type serial
; Nokia protocol for infrared with other Nokia models
;    Connection "irdaphonet"/"irda", device type irda
; -----------------------------------------------------------------------------
; AT commands for infrared. Used with Nokia, Alcatel, Siemens, etc.
;    Connection "irdaat", device type irda
; -----------------------------------------------------------------------------
; OBEX for infrared
;    Connection "irdaobex", device type irda.
; ============================================================= Bluetooth =====
; Nokia protocol with serial device set in BT stack (WidComm, other) from
; adequate service and Nokia 6210
;    Connection "fbusblue", device type serial
; Nokia protocol with serial device set in BT stack (WidComm, other) from
; adequate service and other Nokia models
;    Connection "phonetblue", device type serial
; -----------------------------------------------------------------------------
; Nokia protocol for Bluetooth stack with Nokia 6210
;    Connection "bluerffbus", device type BT
; Nokia protocol for Bluetooth stack with DCT4 Nokia models, which don't inform
; about services correctly (6310, 6310i with firmware lower than 5.50, 8910,..)
;    Connection "bluerfphonet", device type BT
; Nokia protocol for Bluetooth stack with other DCT4 Nokia models
;    Connection "bluephonet", device type BT
; -----------------------------------------------------------------------------
; AT commands for Bluetooth stack and 6210 / DCT4 Nokia models, which don't
; inform about BT services correctly (6310, 6310i with firmware lower
; than 5.50, 8910,..)
;    Connection "bluerfat", device type BT
; AT commands for Bluetooth stack with other phones (Siemens, other Nokia,etc.)
;    Connection "blueat", device type BT
; -----------------------------------------------------------------------------
; OBEX for Bluetooth stack with DCT4 Nokia models, which don't inform about
; BT services correctly (6310, 6310i with firmware lower than 5.50, 8910,...)
;    Connection "bluerfobex", device type BT
; OBEX for Bluetooth stack with other phones (Siemens, other Nokia, etc.)
;    Connection "blueobex", device type BT.
; -----------------------------------------------------------------------------
;    Connection "bluerfgnapbus", device type BT, model "gnap"
;    Connection "irdagnapbus", device type irda, model "gnap"
; Step2. According to device type from Step1 and used OS set Port parameter
; -----------------------------------------------------------------------------
; Port type | "Port" parameter in Windows/DOS | "Port" parameter in Linux/Unix
; ----------|---------------------------------|--------------------------------
; serial    | "com*:"                         | "/dev/ttyS*"
;           | (example "com1:")               | (example "/dev/ttyS1")
;           |                                 | or "/dev/tts/**" (with DevFS)
;           |                                 | virtual serial ports like
;           |                                 | "/dev/ircomm*" or "/dev/rfcomm*"
; ----------|---------------------------------|--------------------------------
; irda      | ignored (can be empty)          | ignored (can be empty)
; ----------|---------------------------------|--------------------------------
; BT        | Bluetooth device address (example "00:11:22:33:44:55").
;           | Optionally you can also include channel after slash
;           | (example "00:11:22:33:44:55/12"). Can be also empty.
; ----------|---------------------------------|--------------------------------
; dku2      | ignored (can be empty)          | /dev/ttyUSB* or /dev/ttyACM*
; ----------|---------------------------------|--------------------------------
; dku5      | ignored (can be empty)          | connection with it not possible
; ----------|---------------------------------|--------------------------------
; usb       | connection with it not possible | "/dev/ttyUSB*"
; Step3. Set other config parameters
; -----------------------------------------------------------------------------
; Parameter name  | Description
; ----------------|------------------------------------------------------------
; Model           | Should not be used unless you have a good reason to do so.
;                 | If Gammu doesn't recognize your phone model, put it here.
;                 | Example values: "6110", "6150", "6210", "8210"
; SynchronizeTime | if you want to set time from computer to phone during
;                 | starting connection. Do not rather use this option when
;                 | when to reset phone during connection (in some phones need
;                 | to set time again after restart)
; GammuLoc        | name of localisation file
; StartInfo       | this option allows one to set, that you want (setting "yes")
;                 | to see message on the phone screen or phone should enable
;                 | light for a moment during starting connection. Phone
;                 | WON'T beep during starting connection with this option.
; GammuCoding     | forces using specified codepage (in win32 - for example
;                 | "1250" will force CP1250) or UTF8 (in Linux - "utf8")
; ----------------|------------------------------------------------------------
; Logfile         | Use, when want to have logfile from communication.
; Logformat       | What debug info and format should be used:
;                 |   "nothing" - no debug level (default)
;                 |   "text"    - transmission dump in text format
;                 |   "textall" - all possible info in text format
;                 |   "errors"  - errors in text format
;                 |   "binary"  - transmission dump in binary format
; ----------------|------------------------------------------------------------
; Features        | Custom features for phone. This can be used as override
;                 | when values coded in common/gsmphones.c are bad or
;                 | missing. Consult include/gammu-info.h for possible values
;                 | (all Feature values without leading F_ prefix).
;                 | Please report correct values to Gammu authors.
; ----------------|------------------------------------------------------------
; Use_Locking     | under Unix/Linux use "yes", if want to lock used device
;                 | to prevent using it by other applications. In win32 ignored
; vim: et ts=4 sw=4 sts=4 tw=78 spell spelllang=en_us