PFLOGSUMM(1) User Contributed Perl Documentation PFLOGSUMM(1)

pflogsumm - Produce Postfix MTA logfile summary

Copyright (C) 1998-2026 by James S. Seymour, Release 1.2.0

pflogsumm --[dump-config|help|version]
Note: Where both long- and short-form options exist only the
latter are shown above. See man page for long-form equivalents.
If no file(s) specified, reads from stdin.  Output is to stdout. Errors
to stderr.

Pflogsumm is a log analyzer/summarizer for the Postfix MTA.  It is
designed to provide an over-view of Postfix activity, with just enough
detail to give the administrator a "heads up" for potential trouble
spots.

Pflogsumm generates summaries and, in some cases, detailed reports of
mail server traffic volumes, rejected and bounced email, and server
warnings, errors and panics.

--bounce-detail <cnt>
               Limit detailed bounce reports to the top <cnt>.  0
               to suppress entirely.
--config <config file>
               Path to a configuration file containing pflogsumm
               options.
               Supports all standard command-line options (without the
               leading "-" or "--"). Options like "config", "dump-config",
               "help", and "version" technically work here, too, though
               they're not particularly useful in this context.
               Command-line arguments override config file values except
               for boolean options.
--colwidth <n>
                Maximum report output width.  Default is 80 columns.
                0 = unlimited.
                N.B.: --verbose-msg-detail overrides
-d <arg>
--date-range <arg>
                Limits the report to the specified date or range.
                Accepted values:
                    today
                    yesterday
                    "this week" / "last week"
                    "this month" / "last month"
                    YYYY-MM[-DD]
                    "YYYY-MM[-DD] YYYY-MM[-DD]"
                These options do what they suggest, with one
                important caveat:
                    ISO 8601 / RFC 3339-style dates and ranges may
                    not yield accurate results when used with
                    traditional log formats lacking year information
                    ("month day-of-month").
                    In such cases, pflogsumm assumes log entries
                    are from the current year. For example, if the
                    current month is April and a log contains "Apr
                    NN" entries from the previous year, they will
                    be interpreted as from the *current* April.
                    As such, date-based filtering is only reliable
                    for entries less than ~365 days old for
                    old-/traditional-style logfiles.
                Arguments containing spaces must be quoted!
                This/last week/month arguments can take underscores,
                rather than spaces, to avoid quoting: E.g.:
                     --date-range last_week
                ISO 8601/RFC 3339 date ranges may optionally use a
                hyphen or the word "to" for readability. E.g.:
                    "2025-08-01 to 2025-08-08"
                If an optional day (DD) is omitted, the range becomes
                the full month. E.g.:
                    2025-08 == 2025-08-01 through 2025-08-31
                    "2025-07 - 2025-08" == 2025-07-01 - 2025-08-31
--debug <file>
               Enable debugging to <file>
               See Also: -x
--dow0mon
               First day of the week is Monday, rather than Sunday.
               (Used only for this/last week calculations.)
--deferral-detail <cnt>
               Limit detailed deferral reports to the top <cnt>.  0
               to suppress entirely.
--detail <cnt>
               Sets all --*-detail, -h and -u to <cnt>.  Is
               over-ridden by individual settings.  --detail 0
               suppresses *all* detail.
--dump-config
               Dump the config to STDOUT and exit.
               This can be used as both a debugging aid and as a way
               to develop your first config file. For the latter:
               Simply run your usual pflogsumm command line, adding
               --dump-config to it, and redirect STDOUT to a file.
               To make it cleaner: Remove unset configs:
                pflogsumm --dump-config <add'l args> |grep -v ' = $'
--expired-detail <cnt>
               Limit detailed message queue time expired reports to
               the top <cnt>.  0 to suppress entirely.
-e
--extended-detail
               Extended (extreme? excessive?) detail
               Emit detailed reports.  At present, this includes
               only a per-message report, sorted by sender domain,
               then user-in-domain, then by queue i.d.
               WARNING: the data built to generate this report can
               quickly consume very large amounts of memory if a
               lot of log entries are processed!
-h <cnt>
--host-cnt <cnt>
               top <cnt> to display in host/domain reports.
               0 = none.
               See also: "-u" and "--*-detail" options for further
                         report-limiting options.
--help         Emit short usage message and bail out.

               (By happy coincidence, "-h" alone does much the same,
               being as it requires a numeric argument :-).  Yeah, I
               know: lame.)
-i
--ignore-case
               Handle complete email address in a case-insensitive
               manner.

               Normally pflogsumm lower-cases only the host and
               domain parts, leaving the user part alone.  This
               option causes the entire email address to be lower-
               cased.
--iso-date-time
               For summaries that contain date or time information,
               use ISO 8601 standard formats (CCYY-MM-DD and HH:MM),
               rather than "Mon DD CCYY" and "HHMM".
-m             modify (mung?) UUCP-style bang-paths
               This is for use when you have a mix of Internet-style
               domain addresses and UUCP-style bang-paths in the log.
               Upstream UUCP feeds sometimes mung Internet domain
               style address into bang-paths.  This option can
               sometimes undo the "damage".  For example:
               "somehost.dom!username@foo" (where "foo" is the next
               host upstream and "somehost.dom" was whence the email
               originated) will get converted to
               "foo!username@somehost.dom".  This also affects the
               extended detail report (-e), to help ensure that by-
                domain-by-name sorting is more accurate.
                See also: --uucp-mung
--mailq        Run "mailq" command at end of report.

               Merely a convenience feature.  (Assumes that "mailq"
               is in $PATH.  See "$mailqCmd" variable to path thisi
               if desired.)
--no-no-msg-size
                Do not emit report on "Messages with no size data".
                Message size is reported only by the queue manager.
                The message may be delivered long-enough after the
                (last) qmgr log entry that the information is not in
                the log(s) processed by a particular run of
                pflogsumm.  This throws off "Recipients by message
                size" and the total for "bytes delivered." These are
                normally reported by pflogsumm as "Messages with no
                size data."
--problems-first
               Emit "problems" reports (bounces, defers, warnings,
               etc.) before "normal" stats.
--pscrn-detail <cnt>
               Limit postscreen detail reporting to top <cnt> lines of
               each event. 0 to suppress entirely.
               Note: Postscreen rejects are collected and reported
               in any event.
--pscrn-stats
               Collect and emit postscreen summary stats.
               Note: Postscreen rejects are collected and reported
               in any event.
--rej-add-from
               For those reject reports that list IP addresses or
               host/domain names: append the email from address to
               each listing.  (Does not apply to "Improper use of
               SMTP command pipelining" report.)
-q
--quiet
               quiet - don't print headings for empty reports

               note: headings for warning, fatal, and "master"
               messages will always be printed.
--rej-add-to
               For sender reject reports: Add the intended recipient
               address.
--reject-detail <cnt>
               Limit detailed smtpd reject, warn, hold and discard
               reports to the top <cnt>.  0 to suppress entirely.
--smtp-detail <cnt>
               Deprecated
--smtpd-stats
               Generate smtpd connection statistics.
               The "per-day" report is not generated for single-day
               reports.  For multiple-day reports: "per-hour" numbers
               are daily averages (reflected in the report heading).
--smtpd-warning-detail <cnt>
               Deprecated. Use --warning-detail instead.
               Limit detailed smtpd warnings reports to the top <cnt>.
               0 to suppress entirely.
--srs-mung
               Undo SRS address munging.
               If your postfix install has an SRS plugin running, many
               addresses in the report will contain the SRS-formatted
               email addresses, also for non-local addresses (f.i.
               senders). This option will try to undo the "damage".
               Addresses of the form:
                 SRS0=A6cv=PT=sender.example.com=support@srs.example.net
               will be reformatted to their original value:
                 support@sender.example.com
--syslog-name=name
               Set syslog-name to look for for Postfix log entries.
               By default, pflogsumm looks for entries in logfiles
               with a syslog name of "postfix," the default.
               If you've set a non-default "syslog_name" parameter
               in your Postfix configuration, use this option to
               tell pflogsumm what that is.
               See the discussion about the use of this option under
               "NOTES," below.
--ssl-tls-stats
               Report SMTP TLS statistics and SMTPD SSL/TLS errors.
-u <cnt>
--user-cnt <cnt>
              top <cnt> to display in user reports. 0 == none.
              See also: "-h" and "--*-detail" options for further
              report-limiting options.
--unprocd-file <filename>
              Emit unprocessed logfile lines to file <filename>
--use-orig-to
              Where "orig_to" fields are found, report that in place
              of the "to" address.
--uucp-mung
               modify (mung?) UUCP-style bang-paths
               See also: -m
--verbose-msg-detail
               For the message deferral, bounce and reject summaries:
               display the full "reason", rather than a truncated one.
               Note: this can result in quite long lines in the report.
--verp-mung [n]
               If n = 1 or is not provided, perform basic "VERP"
               address munging, converting sender addresses of the form
                  "list-return-NN-someuser=some.dom@host.sender.dom"
                to
                  "list-return-ID-someuser=some.dom@host.sender.dom"
               In other words: replace the numeric value with "ID".
               If n = 2, the munging is more "aggressive", converting the
               address to something like:
                    "list-return@host.sender.dom"
               See "NOTES" regarding this option.
--version      Print program name and version and bail out.
--warning-detail <cnt>
               Limit detailed warnings reports to the top <cnt>.
               0 to suppress entirely.
-x <file>      Enable debugging to <file>
               See Also: --debug
--zero-fill    "Zero-fill" certain arrays so reports come out with
               data in columns that that might otherwise be blank.

Pflogsumm doesn't return anything of interest to the shell.

Error messages are emitted to stderr.

Produce a report of previous day's activities:
    pflogsumm -d yesterday /var/log/maillog
A report of prior week's activities:
    pflogsumm -d last_week /var/log/maillog.0
What's happened so far today:
    pflogsumm -d today /var/log/maillog
Crontab entry to generate a report of the previous day's activity
at 10 minutes after midnight:
    10 0 * * * /usr/local/sbin/pflogsumm -d yesterday /var/log/maillog
      2>&1 |/usr/bin/mailx -s "`uname -n` daily mail stats" postmaster
Crontab entry to generate a report for the prior week's activity.
    10 4 * * 0 /usr/local/sbin/pflogsumm -d "last week" /var/log/maillog.0
      2>&1 |/usr/bin/mailx -s "`uname -n` weekly mail stats" postmaster
(The two crontab examples, above, must actually be a single line
 each.  They're broken-up into two-or-more lines due to page
 formatting issues.)
Using a config file:
    pflogsumm --config /usr/local/etc/pflogusmm/daily.conf
Using a config file, overriding a config file options on the command
line:
    pflogsumm --config /usr/local/etc/pflogsumm/daily.conf
      --detail 30
    This would override *all* detail settings in the config
    file, setting them all to 30.
    pflogsumm --config /usr/local/etc/pflogsumm/daily.conf
      --detail 30 --host-cnt 10
    This would override all detail settings in the config
    file, setting them all to 30, with the global detail
    setting in turn being overridden to 10 for host count.

pffrombyto, pftobyfrom
The pflogsumm FAQ: pflogsumm-faq.txt.

Some options, such as date range, have both short-form and
long-form names. In the interest of brevity, only the
short-form options are shown in the SYNOPSIS and in 
pflogsumm's "help" output.
Pflogsumm makes no attempt to catch/parse non-Postfix log
entries.  Unless it has "postfix/" in the log entry, it will be
ignored.
It's important that the logs are presented to pflogsumm in
chronological order so that message sizes are available when
needed.
For display purposes: integer values are munged into "kilo" and
"mega" notation as they exceed certain values.  I chose the
admittedly arbitrary boundaries of 512k and 512m as the points at
which to do this--my thinking being 512x was the largest number
(of digits) that most folks can comfortably grok at-a-glance.
These are "computer" "k" and "m", not 1000 and 1,000,000.  You
can easily change all of this with some constants near the
beginning of the program.
"Items-per-day" reports are not generated for single-day
reports.  For multiple-day reports: "Items-per-hour" numbers are
daily averages (reflected in the report headings).
Message rejects, reject warnings, holds and discards are all
reported under the "rejects" column for the Per-Hour and Per-Day
traffic summaries.
Verp munging may not always result in correct address and
address-count reduction.
Verp munging is always in a state of experimentation.  The use
of this option may result in inaccurate statistics with regards
to the "senders" count.
UUCP-style bang-path handling needs more work.  Particularly if
Postfix is not being run with "swap_bangpath = yes" and/or *is* being
run with "append_dot_mydomain = yes", the detailed by-message report
may not be sorted correctly by-domain-by-user.  (Also depends on
upstream MTA, I suspect.)
The "percent rejected" and "percent discarded" figures are only
approximations.  They are calculated as follows (example is for
"percent rejected"):
    percent rejected =

        (rejected / (delivered + rejected + discarded)) * 100
There are some issues with the use of --syslog-name.  The problem is
that, even with Postfix' $syslog_name set, it will sometimes still
log things with "postfix" as the syslog_name.  This is noted in
/etc/postfix/sample-misc.cf:
    # Beware: a non-default syslog_name setting takes effect only
    # after process initialization. Some initialization errors will be
    # logged with the default name, especially errors while parsing
    # the command line and errors while accessing the Postfix main.cf
    # configuration file.
As a consequence, pflogsumm must always look for "postfix," in logs,
as well as whatever is supplied for syslog_name.
Where this becomes an issue is where people are running two or more
instances of Postfix, logging to the same file.  In such a case:
    . Neither instance may use the default "postfix" syslog name
      and...
    . Log entries that fall victim to what's described in
      sample-misc.cf will be reported under "postfix", so that if
      you're running pflogsumm twice, once for each syslog_name, such
      log entries will show up in each report.
The Pflogsumm Home Page is at:
    http://jimsun.LinxNet.com/postfix_contrib.html

Requires Perl 5.10, minimum, and Date::Calc
For --config, Pflogsumm requires the Config::Simple module.
Both of the above can be obtained from CPAN at http://www.perl.com
or from your distro's repository.
Pflogsumm is currently written and tested under Perl 5.38.
As of version 19990413-02, pflogsumm worked with Perl 5.003, but
future compatibility is not guaranteed.

This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You may have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307,
USA.

An on-line copy of the GNU General Public License can be found
http://www.fsf.org/copyleft/gpl.html.
2026-04-22 1.2.0