USERADD(8) System Management Commands USERADD(8)

名称

useradd - 创建一个新用户或更新默认新用户信息

大纲

useradd [options] LOGIN

useradd -D

useradd -D [options]

描述

When invoked without the -D option, the useradd command creates a new user account using the values specified on the command line plus the default values from the system. Depending on command line options, the useradd command will update system files and may also create the new user's home directory and copy initial files.

By default, a group will also be created for the new user (see -g, -N, -U, and USERGROUPS_ENAB).

选项

The options which apply to the useradd command are:

--badname 

Allow names that do not conform to standards.

-b, --base-dir BASE_DIR

The default base directory for the system if -d HOME_DIR is not specified. BASE_DIR is concatenated with the account name to define the home directory.

If this option is not specified, useradd will use the base directory specified by the HOME variable in /etc/default/useradd, or /home by default.

--btrfs-subvolume-home

Create the user's home directory as a Btrfs subvolume.

If this option is not specified, useradd will follow the default behavior defined by the BTRFS_SUBVOLUME_HOME variable in /etc/default/useradd. If this variable is not set, the default value is no.

When the --btrfs-subvolume-home command-line option is specified, a Btrfs subvolume is created regardless of any configuration file settings.

Subvolumes are only created for regular users, whose UID is within the UID_MIN-UID_MAX range defined in /etc/login.defs. System users get a regular home directory instead. Set the BTRFS_SUBVOLUME_SYSTEM variable in /etc/default/useradd to yes to create subvolumes for system users as well. If this variable is not set, the default value is no.

If the parent directory of the user's home directory is not on a Btrfs filesystem, useradd will not create a subvolume. Instead, it creates a regular directory, prints a warning to standard error, and logs the event via syslog at level LOG_WARN. The user account is still created successfully.

If the filesystem type cannot be determined (e.g., because of insufficient permissions, an I/O error, or a statfs(2) failure), useradd treats this as a fatal error: the home directory is not created, the command exits with a non-zero status (E_HOMEDIR, 12), and an error message is printed.

-c, --comment COMMENT

Any text string. It is generally a short description of the account, and is currently used as the field for the user's full name.

-d, --home-dir HOME_DIR

The new user will be created using HOME_DIR as the value for the user's login directory. The default is to append the LOGIN name to BASE_DIR and use that as the login directory name. The directory HOME_DIR is not created by default. However it will be created for non-system users if either the -m flag is specified or CREATE_HOME in login.defs is set to true. However, it will never be created if the -M flag is specified.

-D, --defaults

看下边，“更改默认值”子节。

-e, --expiredate EXPIRE_DATE

Sets the date on which the user account will be disabled. The value can be specified as a date in the YYYY-MM-DD format or as a number of days since 1970-01-01. The date is interpreted using the UTC timezone.

If not specified, useradd uses the default expiry date specified by the EXPIRE variable in /etc/default/useradd, or an empty string (no expiry) by default.

-f, --inactive INACTIVE

Defines the number of days after a password exceeds its maximum age before the user account gets locked. If the user does not change their password within this period of time, their account becomes inactive. This value is stored in the shadow password file. For more information, see shadow(5).

A value of 0 disables the account when the password expires, with no delay.

A value of -1 empties the respective field in the shadow password file, which means that the inactivity period is not enforced.

If not specified, useradd uses the default inactivity period specified by the INACTIVE variable in /etc/default/useradd, or -1 by default if no value is specified.

-F, --add-subids-for-system

Update /etc/subuid and /etc/subgid even when creating a system account with -r option.

-g, --gid GROUP

The name or the number of the user's primary group. The group name must exist. A group number must refer to an already existing group.

If not specified, the behavior of useradd will depend on the USERGROUPS_ENAB variable in /etc/login.defs. If this variable is set to yes (or -U/--user-group is specified on the command line), a group will be created for the user, with the same name as the loginname. If the variable is set to no (or -N/--no-user-group is specified on the command line), useradd will set the primary group of the new user to the value specified by the GROUP variable in /etc/default/useradd, or 1000 by default.

-G, --groups GROUP1[,GROUP2,...[,GROUPN]]]

A list of supplementary groups which the user is also a member of. Each group is separated from the next by a comma, with no intervening whitespace. The groups are subject to the same restrictions as the group given with the -g option. The default is for the user to belong only to the initial group. In addition to passing in the -G flag, you can add the option GROUPS to the file /etc/default/useradd which in turn will add all users to those supplementary groups.

-h, --help

显示帮助信息并退出。

-k, --skel SKEL_DIR

The skeleton directory, which contains files and directories to be copied in the user's home directory, when the home directory is created by useradd.

This option is only valid if the -m (or --create-home) option is specified.

If this option is not set, the skeleton directory is defined by the SKEL variable in /etc/default/useradd or, by default, /etc/skel.

Absolute symlinks that link back to the skel directory will have the /etc/skel prefix replaced with the user's home directory.

如果可以，也复制 ACL 和扩展属性。

-K, --key KEY=VALUE

Overrides /etc/login.defs defaults (UID_MIN, UID_MAX, UMASK, PASS_MAX_DAYS and others).

Example: -K PASS_MAX_DAYS =-1 can be used when creating an account to turn off password aging. Multiple -K options can be specified, e.g.: -K UID_MIN =100 -K  UID_MAX=499

-l, --no-log-init

不要将用户添加到最近登录和登录失败数据库。

By default, the user's entries in the lastlog and faillog databases are reset to avoid reusing the entry from a previously deleted user.

If this option is not specified, useradd will also consult the variable LOG_INIT in the /etc/default/useradd if set to no the user will not be added to the lastlog and faillog databases.

-m, --create-home

Create the user's home directory if it does not exist. The files and directories contained in the skeleton directory (which can be defined with the -k option) will be copied to the home directory.

By default, if this option is not specified and CREATE_HOME is not enabled, no home directories are created.

The directory where the user's home directory is created must exist and have proper SELinux context and permissions. Otherwise the user's home directory cannot be created or accessed.

-M, --no-create-home

Do not create the user's home directory, even if the system wide setting from /etc/login.defs (CREATE_HOME) is set to yes.

-N, --no-user-group

Do not create a group with the same name as the user, but add the user to the group specified by the -g option or by the GROUP variable in /etc/default/useradd.

The default behavior (if the -g, -N, and -U options are not specified) is defined by the USERGROUPS_ENAB variable in /etc/login.defs.

-o, --non-unique

allows the creation of an account with an already existing UID.

This option is only valid in combination with the -u option. As a user identity serves as key to map between users on one hand and permissions, file ownerships and other aspects that determine the system's behavior on the other hand, more than one login name will access the account of the given UID.

-p, --password PASSWORD

defines an initial password for the account. PASSWORD is expected to be encrypted, as returned by crypt (3). Within a shell script, this option allows to create efficiently batches of users.

Without this option, the new account will be locked and with no password defined, i.e. a single exclamation mark in the respective field of /etc/shadow. This is a state where the user won't be able to access the account or to define a password himself.

Note:Avoid this option on the command line because the password (or encrypted password) will be visible by users listing the processes.

您应该确保密码符合系统的密码政策。

-r, --system

创建一个系统账户。

System users will be created with no aging information in /etc/shadow, and their numeric identifiers are chosen in the SYS_UID_MIN-SYS_UID_MAX range, defined in /etc/login.defs, instead of UID_MIN-UID_MAX (and their GID counterparts for the creation of groups).

Note that useradd will not create a home directory for such a user, regardless of the default setting in /etc/login.defs (CREATE_HOME). You have to specify the -m options if you want a home directory for a system account to be created.

Note that this option will not update /etc/subuid and /etc/subgid. You have to specify the -F options if you want to update the files for a system account to be created.

-R, --root CHROOT_DIR

Apply changes in the CHROOT_DIR directory and use the configuration files from the CHROOT_DIR directory. Only absolute paths are supported. No SELINUX support.

-P, --prefix PREFIX_DIR

Apply changes to configuration files under the root filesystem found under the directory PREFIX_DIR. This option does not chroot and is intended for preparing a cross-compilation target. Some limitations: NIS and LDAP users/groups are not verified. PAM authentication is using the host files. No SELINUX support.

-s, --shell SHELL

sets the path to the user's login shell. Without this option, the system will use the SHELL variable specified in /etc/default/useradd, or, if that is as well not set, the field for the login shell in /etc/passwd remains empty.

-u, --uid UID

The numerical value of the user's ID. This value must be unique, unless the -o option is used. The value must be non-negative. The default is to use the smallest ID value greater than or equal to UID_MIN and greater than every other user.

See also the -r option and the UID_MAX description.

-U, --user-group

创建一个和用户同名的组，并将用户添加到组中。

The default behavior (if the -g, -N, and -U options are not specified) is defined by the USERGROUPS_ENAB variable in /etc/login.defs.

-Z, --selinux-user SEUSER

defines the SELinux user for the new account. Without this option, SELinux uses the default user. Note that the shadow system doesn't store the selinux-user, it uses semanage(8) for that.

--selinux-range SERANGE

defines the SELinux MLS range for the new account. Without this option, SELinux uses the default range. Note that the shadow system doesn't store the selinux-range, it uses semanage(8) for that.

This option is only valid if the -Z (or --selinux-user) option is specified.

更改默认值

When invoked with only the -D option, useradd will display the current default values. When invoked with -D plus other options, useradd will update the default values for the specified options. Valid default-changing options are:

-b, --base-dir BASE_DIR

sets the path prefix for a new user's home directory. The user's name will be affixed to the end of BASE_DIR to form the new user's home directory name, if the -d option is not used when creating a new account.

This option sets the HOME variable in /etc/default/useradd.

-e, --expiredate EXPIRE_DATE

sets the date on which newly created user accounts are disabled.

This option sets the EXPIRE variable in /etc/default/useradd.

-f, --inactive INACTIVE

specifies the number of days after a password expires during which the user can still log in. After this period, the account is locked.

This option sets the INACTIVE variable in /etc/default/useradd.

-g, --gid GROUP

sets the default primary group for newly created users, accepting group names or a numerical group ID. The named group must exist, and the GID must have an existing entry.

This option sets the GROUP variable in /etc/default/useradd.

-s, --shell SHELL

defines the default login shell for new users.

This option sets the SHELL variable in /etc/default/useradd.

注意：

The system administrator is responsible for placing the default user files in the /etc/skel/ directory (or any other skeleton directory specified in /etc/default/useradd or on the command line).

您可能不能想 NIS 组或 LDAP 组添加用户。这只能在相应服务器上进行。

Similarly, if the username already exists in an external user database such as NIS or LDAP, useradd will deny the user account creation request.

Usernames may contain only lower and upper case letters, digits, underscores, dashes, or dots. They can end with a dollar sign. Dashes are not allowed at the beginning of the username. Fully numeric usernames and usernames . or .. are also disallowed. It is not recommended to use usernames beginning with . character as their home directories will be hidden in the ls output.

用户名不能超过 256 个字符长。

配置文件

The following configuration variables in /etc/login.defs change the behavior of this tool:

CREATE_HOME (boolean)

指示是否应该为新用户默认创建主目录。

此设置并不应用到系统用户，并且可以使用命令行覆盖。

GID_MAX (number), GID_MIN (number)

Range of group IDs used for the creation of regular groups by useradd, groupadd, or newusers.

The default value for GID_MIN (resp. GID_MAX) is 1000 (resp. 60000).

HOME_MODE (number)

The mode for new home directories. If not specified, the UMASK is used to create the mode.

useradd and newusers use this to set the mode of the home directory they create.

LASTLOG_UID_MAX (number)

Highest user ID number for which the lastlog entries should be updated. As higher user IDs are usually tracked by remote user identity and authentication services there is no need to create a huge sparse lastlog file for them.

No LASTLOG_UID_MAX option present in the configuration means that there is no user ID limit for writing lastlog entries.

MAIL_DIR (string)

The mail spool directory. This is needed to manipulate the mailbox when its corresponding user account is modified or deleted. If not specified, a compile-time default is used. The parameter CREATE_MAIL_SPOOL in /etc/default/useradd determines whether the mail spool should be created.

MAIL_FILE (string)

定义用户邮箱文件的位置(相对于主目录)。

The MAIL_DIR and MAIL_FILE variables are used by useradd, usermod, and userdel to create, move, or delete the user's mail spool.

MAX_MEMBERS_PER_GROUP (number)

Maximum members per group entry. When the maximum is reached, a new group entry (line) is started in /etc/group (with the same name, same password, and same GID).

默认值是 0，意味着组中的成员数没有限制。

此功能(分割组)允许限制组文件中的行长度。这对于确保 NIS 组的行比长于 1024 字符。

如果要强制这个限制，可以使用 25。

注意：分割组可能不受所有工具的支持(甚至在 Shadow 工具集中)。您不应该使用这个变量，除非真的需要。

PASS_MAX_DAYS (number)

一个密码可以使用的最大天数。如果密码比这旧，将会强迫更改密码。如果不指定，就假定为 -1，这会禁用这个限制。

PASS_WARN_AGE (number)

The number of days warning given before a password expires. A zero means warning is given only upon the day of expiration, a value of -1 means no warning is given. If not specified, no warning will be provided.

SUB_GID_MIN (number), SUB_GID_MAX (number), SUB_GID_COUNT (number)

If /etc/subuid exists, the commands useradd and newusers (unless the user already have subordinate group IDs) allocate SUB_GID_COUNT unused group IDs from the range SUB_GID_MIN to SUB_GID_MAX for each new user.

The default values for SUB_GID_MIN, SUB_GID_MAX, SUB_GID_COUNT are respectively 100000, 600100000 and 65536.

SUB_GID_DETERMINISTIC (boolean)

If set to yes, the commands useradd, usermod, and newusers will calculate subordinate GID ranges deterministically based on the user's UID instead of searching for the next free range. The formula used is: 
      start = SUB_GID_MIN + ((UID - UID_MIN) * SUB_GID_COUNT)
      end   = start + SUB_GID_COUNT - 1

This ensures the same UID always receives the same subordinate GID range on every system, making it suitable for environments with centralized user management (LDAP, NIS, etc.) or synchronized UIDs across systems.

If SUB_GID_DETERMINISTIC is enabled, you can use usermod --add-subgids -S to produce deterministic subgids.

WARNING: Because UID_MIN is used to calculate the ranges, any change of UID_MIN will change the ranges calculated. SUB_GID_COUNT is used to calculate the ranges, any change of SUB_GID_COUNT will change the ranges calculated. Users with identities less than UID_MIN are incompatible with SUB_GID_DETERMINISTIC, but can still be set manually.

WARNING: Do not mix deterministic and linear (default) allocation on the same system or across systems sharing /etc/subgid via network storage (NFS, etc.). Mixing allocation methods will cause subordinate ID range conflicts and overlaps .

The default value for SUB_GID_DETERMINISTIC is no.

Range Calculation Examples

With default configuration (UID_MIN=1000, SUB_GID_MIN=100000, SUB_GID_COUNT=65536):

UID Calculation Subordinate GID Range
1000 100000 + ((1000-1000) * 65536) 100000-165535
1001 100000 + ((1001-1000) * 65536) 165536-231071
1002 100000 + ((1002-1000) * 65536) 231072-296607
1100 100000 + ((1100-1000) * 65536) 6653600-6719135

Subordinate ID Space Planning

When planning subordinate ID allocation, calculate the maximum number of users the space can accommodate:

      capacity = (SUB_GID_MAX - SUB_GID_MIN) / SUB_GID_COUNT

With default values: (600100000 - 100000) / 65536 ≈ 9155 users.

For high-density environments with many users and smaller allocations:

        SUB_GID_COUNT  4096
        SUB_GID_MIN    100000
        SUB_GID_MAX    10000000

This gives: (10000000 - 100000) / 4096 ≈ 2417 users.

UNSAFE_SUB_GID_DETERMINISTIC_WRAP (boolean)

WARNING: SECURITY RISK - MAY CAUSE RANGE OVERLAPS AND PRIVILEGE ESCALATION!

Only effective when SUB_GID_DETERMINISTIC is set to yes.

When set to yes (WRAP MODE), allows the deterministic range calculation to wrap around using modulo arithmetic when a UID would overflow the configured subordinate ID space. The subordinate ID space is treated as a ring buffer.

WARNING: Range overlaps can lead to container escapes and privilege escalation. For example, with SUB_GID_MIN=100000, SUB_GID_MAX=200000, SUB_GID_COUNT=65536, User A (UID 1000) gets range [100000, 165535] and User B (UID 1001) wraps and overlaps with User A. User B's container can now access files from User A's containers.

Use only in development, testing, or tightly constrained lab environments.

When set to no (default), any arithmetic overflow or range exceeding SUB_GID_MAX is a hard error. This guarantees non-overlapping, monotonic allocation.

The default value for UNSAFE_SUB_GID_DETERMINISTIC_WRAP is no.

SUB_UID_MIN (number), SUB_UID_MAX (number), SUB_UID_COUNT (number)

If /etc/subuid exists, the commands useradd and newusers (unless the user already have subordinate user IDs) allocate SUB_UID_COUNT unused user IDs from the range SUB_UID_MIN to SUB_UID_MAX for each new user.

The default values for SUB_UID_MIN, SUB_UID_MAX, SUB_UID_COUNT are respectively 100000, 600100000 and 65536.

SUB_UID_DETERMINISTIC (boolean)

If set to yes, the commands useradd, usermod, and newusers will calculate subordinate UID ranges deterministically based on the user's UID instead of searching for the next free range. The formula used is: 
      start = SUB_UID_MIN + ((UID - UID_MIN) * SUB_UID_COUNT)
      end   = start + SUB_UID_COUNT - 1

This ensures the same UID always receives the same subordinate UID range on every system, making it suitable for environments with centralized user management (LDAP, NIS, etc.) or synchronized UIDs across systems.

If SUB_UID_DETERMINISTIC is enabled, you can use usermod --add-subuids -S to produce deterministic subuids.

WARNING: Because UID_MIN is used to calculate the ranges, any change of UID_MIN will change the ranges calculated. SUB_UID_COUNT is used to calculate the ranges, any change of SUB_UID_COUNT will change the ranges calculated. Users with identities less than UID_MIN are incompatible with SUB_UID_DETERMINISTIC, but can still be set manually.

WARNING: Do not mix deterministic and linear (default) allocation on the same system or across systems sharing /etc/subuid via network storage (NFS, etc.). Mixing allocation methods will cause subordinate ID range conflicts and overlaps .

The default value for SUB_UID_DETERMINISTIC is no.

Range Calculation Examples

With default configuration (UID_MIN=1000, SUB_UID_MIN=100000, SUB_UID_COUNT=65536):

UID Calculation Subordinate UID Range
1000 100000 + ((1000-1000) * 65536) 100000-165535
1001 100000 + ((1001-1000) * 65536) 165536-231071
1002 100000 + ((1002-1000) * 65536) 231072-296607
1100 100000 + ((1100-1000) * 65536) 6653600-6719135

Subordinate ID Space Planning

When planning subordinate ID allocation, calculate the maximum number of users the space can accommodate:

      capacity = (SUB_UID_MAX - SUB_UID_MIN) / SUB_UID_COUNT

With default values: (600100000 - 100000) / 65536 ≈ 9155 users.

For high-density environments with many users and smaller allocations:

        SUB_UID_COUNT  4096
        SUB_UID_MIN    100000
        SUB_UID_MAX    10000000

This gives: (10000000 - 100000) / 4096 ≈ 2417 users.

UNSAFE_SUB_UID_DETERMINISTIC_WRAP (boolean)

WARNING: SECURITY RISK - MAY CAUSE RANGE OVERLAPS AND PRIVILEGE ESCALATION!

Only effective when SUB_UID_DETERMINISTIC is set to yes.

When set to yes (WRAP MODE), allows the deterministic range calculation to wrap around using modulo arithmetic when a UID would overflow the configured subordinate ID space. The subordinate ID space is treated as a ring buffer.

WARNING: Range overlaps can lead to container escapes and privilege escalation. For example, with SUB_UID_MIN=100000, SUB_UID_MAX=200000, SUB_UID_COUNT=65536, User A (UID 1000) gets range [100000, 165535] and User B (UID 1001) wraps and overlaps with User A. User B's container can now access files from User A's containers.

Use only in development, testing, or tightly constrained lab environments.

When set to no (default), any arithmetic overflow or range exceeding SUB_UID_MAX is a hard error. This guarantees non-overlapping, monotonic allocation.

The default value for UNSAFE_SUB_UID_DETERMINISTIC_WRAP is no.

SYS_GID_MAX (number), SYS_GID_MIN (number)

Range of group IDs used for the creation of system groups by useradd, groupadd, or newusers.

The default value for SYS_GID_MIN (resp. SYS_GID_MAX) is 101 (resp. GID_MIN-1).

SYS_UID_MAX (number), SYS_UID_MIN (number)

Range of user IDs used for the creation of system users by useradd or newusers.

The default value for SYS_UID_MIN (resp. SYS_UID_MAX) is 101 (resp. UID_MIN-1).

UID_MAX (number), UID_MIN (number)

Range of user IDs used for the creation of regular users by useradd or newusers.

The default value for UID_MIN (resp. UID_MAX) is 1000 (resp. 60000).

UMASK (number)

文件模式创建掩码初始化为此值。如果没有指定，掩码初始化为 022。

useradd and newusers use this mask to set the mode of the home directory they create if HOME_MODE is not set.

It is also used by pam_umask as the default umask value.

USERGROUPS_ENAB (boolean)

If set to yes, userdel will remove the user's group if it contains no more members, and useradd will create by default a group with the name of the user.

文件

/etc/passwd

用户账户信息。

/etc/shadow

安全用户账户信息。

/etc/group

组账户信息。

/etc/gshadow

安全组账户信息。

/etc/default/useradd

账户创建的默认值。

/etc/shadow-maint/useradd-pre.d/*, /etc/shadow-maint/useradd-post.d/*

Run-part files to execute during user addition. The environment variable ACTION will be populated with useradd and SUBJECT with the username. useradd-pre.d will be executed prior to any user addition. useradd-post.d will execute after user addition. If a script exits non-zero then execution will terminate.

/etc/skel/

包含默认文件的目录。

/etc/subgid

Per user subordinate group IDs.

/etc/subuid

Per user subordinate user IDs.

/etc/login.defs

Shadow 密码套件配置。

退出值

The useradd command exits with the following values:

0

success

1

can't update password file

2

invalid command syntax

3

invalid argument to option

4

UID already in use (and no -o)

6

specified group doesn't exist

9

username or group name already in use

10

can't update group file

12

can't create home directory

14

can't update SELinux user mapping

19

invalid user or group name

参见

chfn(1), chsh(1), passwd(1), crypt(3), groupadd(8), groupdel(8), groupmod(8), login.defs(5), newusers(8), subgid(5), subuid(5), userdel(8), usermod(8).

2026-07-30 shadow-utils 4.20.0